Loading...

Coban - GPS104

The Coban GPS104 is a versatile GPS tracker that combines GSM/GPRS wireless communication with GPS satellite positioning technology. With its wide range of features and functions, this tracker offers multiple ways to track and monitor your vehicles or assets. Whether you're using the monitor software on your PC, tracking through your PDA cell phone, or using Google Earth, you can easily access real-time tracking information and stay connected to your assets at all times.

Some of the outstanding features of the Coban GPS104 include the ability to add and delete authorization, single locating, continuous auto tracking, and tracking with limited or unlimited times based on time intervals. It also offers smart tracking based on time and distance intervals, automatic update of vehicle positions during turns, and GPS drift suppression for accurate location information. Additionally, you can benefit from location-based services, check the vehicle state, set terminal time, and even monitor voice surveillance.

Other notable features include data logging, data load, forwarding third-party messages, charge inquiries, oil and power system control, various alarm types (such as over speed, accident, shock sensor, SOS, low battery, and power off), GPS blind spot alerts, and the ability to configure parameters via USB. The Coban GPS104 also supports both TCP and UDP communication protocols, allowing you to switch between SMS and GPRS modes as needed. With its GPRS tracking and monitoring platform, you can easily manage and track your assets with minimal GPRS traffic.

This information only is for informational purposes only, Green-Gps does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up GPS104

Country
Carrier
APN
User
Password

To set the tracker send the following commands by SMS messages, the sample setup the device password is YD2shp, this password is the default

  1. Factory reset
    beginYD2shp
  2. Set the time zone UTC-0
    time zoneYD2shp 0
  3. Set the operator APN
    apnYD2shp {{apn}}
  4. Set the username and password of APN operator
    upYD2shp {{apnu}} {{apnp}}
  5. Set the GPRS Server
    adminipYD2shp 54.85.159.138 8888
  6. Set update interval
    fix060s060s***nYD2shp
  7. Switch to GPRS mode to UDP or TCP
    X5F1L11MPF,1,1
    or
    X5F1L11MPF

To check settings checkYD2shp

To enable the status of the fuel sensor or improve the transmission of the status of the digital sensors protocolYD2shp 18