The CAREU UCAN GPS Tracker is a Green-Gps compatible, plug-and-play OBD-II tracker built for fast deployment across vehicle fleets. Designed to deliver reliable real-time tracking and vehicle telemetry, the UCAN connects directly to any standard OBD-II port to begin supplying location, engine/ignition status, and OBD diagnostics to Green-Gps for immediate visibility into fleet operations and security.
With 4G LTE (Cat.1 / Cat.M) connectivity and fallback to 3G/2G where required, optional eSIM support, a built-in GPS/GSM antenna, and a 6-axis accelerometer, the UCAN is engineered for fleet management, anti-theft monitoring, driver behavior analysis, and fuel monitoring — all accessible through your Green-Gps dashboard for consolidated reporting and alerts.
Key Highlights
- Green-Gps compatible plug-and-play OBD-II installation for fast fleet rollout and minimal downtime.
- 4G LTE Cat.1 / Cat.M connectivity with 3G/2G fallback (variant-dependent) and optional eSIM for flexible roaming and provisioning.
- Reads OBD-II vehicle data — mileage/odometer, RPM, vehicle speed, fuel level, working hours and DTC error codes — enabling robust telemetry and maintenance insight.
- Built-in 6-axis accelerometer detects harsh acceleration, harsh braking, impact events, harsh cornering and flip-over conditions for driver behavior and safety monitoring.
- Large onboard log memory: up to 200,000 position logs (4G version) and 150,000 logs (3/2G version) to preserve history during network interruptions.
- Bluetooth 4.0 (4G variant) for integration with Bluetooth sensors and accessories where sensor telemetry is required.
- Supports remote configuration and FOTA (firmware over-the-air) updates via FTP for centralized management and reduced maintenance trips.
How It Works with Green-Gps
The UCAN integrates directly with Green-Gps to provide continuous, Green-Gps compatible GPS tracker data streams. Once plugged into the vehicle OBD-II port, the device collects GNSS position and OBD telemetry, then transmits secure packets to Green-Gps over cellular networks. Fleet managers can view real-time tracking, configure alerts, and generate reports from Green-Gps without additional hardware changes.
- Real-time location and telemetry updates pushed to Green-Gps for live fleet tracking and route monitoring.
- Engine/ignition status detection and OBD-II diagnostics (DTC codes, RPM, speed) for maintenance and compliance workflows.
- Fuel monitoring via OBD-level fuel level and odometer readings to support fuel management and cost analysis.
- Harsh driving and impact events captured by the 6-axis accelerometer and reported to Green-Gps for driver scorecards and safety alerts.
- Bluetooth 4.0 support (4G variant) to connect Bluetooth sensors or beacons and surface sensor data inside Green-Gps dashboards.
Technical Overview
| Connectivity | 4G LTE (Cat.1 / Cat.M) with fallback to 3G/2G depending on variant; optional eSIM support |
|---|---|
| Network Fallback | 3G / 2G fallback where supported by variant |
| OBD-II Data | Mileage/odometer, RPM, fuel level, vehicle speed, working hours, DTC OBD-II error codes |
| Sensors | Built-in 6-axis accelerometer; internal backup battery for limited off-power logging |
| Antennas | Built-in GPS and GSM antennas |
| Memory | Up to 200,000 position logs (4G); 150,000 position logs (3/2G) |
| Interfaces | OBD-II port; optional RS-232 & digital I/O accessory (4G only); optional wireless relay accessory (4G only) |
| Bluetooth | Bluetooth 4.0 available in 4G variant for Bluetooth sensors and beacons |
| Firmware & Management | FOTA (firmware over-the-air) via FTP; remote configuration of reporting intervals, geofences and alert thresholds |
| Form Factor | Compact plug-and-play OBD-II unit for vehicle/asset mounting |
Use Cases
- Fleet management and route monitoring for logistics, couriers, and delivery services using real-time tracking and telemetry.
- Vaccine and temperature-sensitive distribution where location history and delivery timing are critical (combine with Green-Gps alerts).
- Driver behavior and safety programs using accelerometer-driven event detection for harsh braking, acceleration and cornering.
- Fuel monitoring and maintenance scheduling by leveraging OBD-II fuel level, odometer and DTC data for predictive servicing.
- Anti-theft and security monitoring: power loss/low battery alarms and optional accessory relay/digital I/O for integration with immobilizer-style controls when configured.
Why Choose This Tracker with Green-Gps
The CAREU UCAN offers a balanced mix of plug-and-play convenience and telematics depth, making it a strong choice for fleets that require quick installation, reliable real-time tracking, and detailed vehicle telemetry. As a Green-Gps compatible GPS tracker, UCAN feeds position, OBD diagnostics and event data directly into Green-Gps, enabling unified fleet management, driver behavior analysis, and fuel monitoring from a single platform. Remote configuration and FOTA support reduce onsite maintenance, while optional eSIM and Bluetooth expand connectivity and sensor integration options. For fleet operators looking for scalable, easy-to-deploy vehicle trackers that support telemetry, anti-theft workflows and comprehensive reporting, UCAN delivers practical value without complex wiring or lengthy install processes.
Set Up UCAN
Use with a tracker
-
Set the Operator APN
CountryCarrierAPNinternet.comcel.com.coUserCOMCELWEBPasswordCOMCELWEB
- Check your tracker clock setup is set UTC-0 or GMT. (The most trackers come from the factory on UTC.)
- For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
-
Set Up the IP and port on your tracker: (automatic detect tracker's protocol.)
IP 54.85.159.138 Port 8888 - Add on your Account on devices with the IMEI or unique ID.