The G01-4G GPS tracker is a Green-Gps compatible vehicle tracking solution built for reliable real-time tracking and fleet management. Designed for cars, taxis, rental vehicles and light trucks, the G01-4G uses 4G LTE with SMS fallback to deliver fast position updates, configurable geo-fence alarms, SOS emergency reporting, and vehicle-specific telemetry such as ACC (ignition) detection and remote engine cut control. Its IP67-rated, ABS enclosure and wide operating voltage range make it suitable for professional fleet deployments and harsh automotive environments.
When integrated with Green-Gps, the G01-4G becomes part of a centralized monitoring and anti-theft toolkit: Green-Gps ingests the tracker’s location, alarm and telemetry streams to provide live maps, event alerts, and actionable reports for fleet managers. The device’s listen-in microphone, external speaker support, vibration/movement alarms and main power cut detection all feed into Green-Gps’s alerting and historical reporting so teams can respond faster to theft, breakdowns and safety incidents.
Key Highlights
- Green-Gps compatible 4G GPS tracker for precise, low-latency real-time tracking and mapping.
- Robust IP67-rated housing and wide operating voltage (DC 9V–100V) for vehicle and fleet use.
- Vehicle telemetry included: ACC (ignition) detection, SOS button, vibration/movement and main power cut alarms.
- Remote immobilizer capability (remote engine cut) to support anti-theft response workflows in Green-Gps.
- Built-in microphone and external speaker support for listen‑in and two-way audio scenarios.
- 4G/LTE communication with SMS fallback keeps tracking reliable across cellular conditions.
- Compact form factor with multiple I/O and interfaces (UART/RS232/CAN/K-Line) for external sensors and telematics integration.
How It Works with Green-Gps
Integrating the G01-4G with Green-Gps turns the device’s raw GNSS fixes and vehicle events into operational intelligence. Green-Gps consumes the tracker’s 4G or SMS updates and translates them into live location, geofence notifications, and driver/vehicle telemetry. Alerts from the tracker—SOS presses, vibration alarms, power loss, and ignition changes—are surfaced in Green-Gps dashboards and can trigger workflows, notifications or automated reports.
- Real-time location and telemetry updates delivered over 4G/LTE with SMS fallback for continuity.
- Ignition and door/alarm status: ACC detection and digital inputs report vehicle state to Green-Gps.
- Fuel monitoring and advanced telemetry: integrates with external fuel or sensor systems via the device’s I/O and serial interfaces (requires compatible peripherals).
- Remote immobilizer: remote engine cut control is available and can be activated through Green-Gps-managed commands for anti-theft response.
- Audio monitoring and emergency handling: SOS button and listen-in microphone events feed into Green-Gps incident workflows. (Bluetooth sensors are managed separately by Green-Gps; the G01-4G does not list built-in BLE.)
Technical Overview
| Connectivity | 4G LTE (QUECTEL EC20 module) with SMS tracking fallback; Standard SIM; internal antenna |
|---|---|
| Bands | Example EU module: LTE-FDD B1/B3/B5/B7/B8/B20; LTE-TDD B38/B40/B41; WCDMA B1/B5/B8; GSM B3/B8 (module/frequencies may vary by region) |
| Power & Battery | Operating voltage DC 9V–100V (some configs list typical 9–80V); optional internal backup battery 180mAh (3.7V) |
| Current Consumption | Work current ~30–60mA @12V; Sleep current ~5–15mA @12V |
| Interfaces | 1 low output channel (e.g., fuel/power off or lock/unlock control); 1 low-IN channel (SOS etc.); 1 high-IN channel (ACC, door or light detection); speaker and microphone external connectors; 5V output for peripherals; UART/RS232/CAN/K-Line compatible interface |
| GNSS | ZKMicro AT6558D GPS/BeiDou chip; cold start ~32s; hot start ~1s; tracking sensitivity ~-162 dBm; internal GNSS antenna |
| Bluetooth | Not specified / no built-in BLE reported in specification |
| Remote Management | Remote commands supported (e.g., engine cut); FOTA/management tools not specified |
| Form Factor | Dimensions 87 × 64 × 26 mm; ABS housing; IP67 waterproof; weight ≈140 g |
| Environmental | Operating -30°C to 75°C; Storage -30°C to 80°C; Humidity 5%–95% |
Use Cases
- Fleet management: real-time tracking, ignition events, and centralized reporting for taxis, delivery vehicles and service fleets.
- Rental and financed vehicles: geo-fencing, remote immobilization and SOS support to reduce theft and speed recovery.
- Passenger vehicles and taxis: live position, driver safety alerts, and listen-in capability for emergencies or incident validation.
- Asset protection and anti-theft: vibration/movement alarms, main power cut detection, and engine cut control integrated into Green-Gps workflows.
- Telematics integrations: connect external fuel sensors, RFID readers or cameras via UART/RS232/CAN/K-Line for extended telemetry and fuel monitoring capabilities.
Why Choose This Tracker with Green-Gps
The G01-4G combined with Green-Gps delivers a focused, dependable solution for operators who need precise GPS tracking, strong anti-theft controls and rich vehicle telemetry. Green-Gps’s platform makes the tracker’s alarms and location data actionable through centralized dashboards, configurable alerts and historical reports. The device’s rugged IP67 housing, wide voltage tolerance and automotive I/O set make it easy to install across diverse vehicle fleets, while features like ACC detection, SOS, listen-in and remote engine cut provide the safety and immobilizer functions fleet managers rely on.
For organizations seeking practical real-time tracking, telemetry and anti-theft integration, the G01-4G is a pragmatic Green-Gps compatible option: it supports fast 4G updates, essential vehicle inputs and flexible external interfaces to extend monitoring and fuel or sensor telemetry where needed. Contact your Green-Gps integrator to confirm region-specific cellular bands and to plan peripheral integrations such as fuel sensors or cameras.
Set Up G01-4G
Use with a tracker
-
Set the Operator APN
CountryCarrierAPNinternet.comcel.com.coUserCOMCELWEBPasswordCOMCELWEB
- Check your tracker clock setup is set UTC-0 or GMT. (The most trackers come from the factory on UTC.)
- For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
-
Set Up the IP and port on your tracker: (automatic detect tracker's protocol.)
IP 54.85.159.138 Port 8888 - Add on your Account on devices with the IMEI or unique ID.