The HB-A9S is a high-end 4G GPS tracker engineered for vehicle fleets that require robust telemetry, multimedia transmission and seamless integration with Green-Gps. As a Green-Gps compatible GPS tracker, the HB-A9S delivers real-time tracking, CANBus vehicle data, and multimedia uploads so fleet managers get actionable location intelligence, driver behavior insights, and improved security — all accessible from the Green-Gps platform.
The device combines cellular connectivity, built-in WiFi hotspot capability, and expandable interfaces to support fuel sensors, cameras, card readers and other peripherals. With ACC/ignition detection, SOS input, remote fuel/power cut and speed limiting via relay, HB-A9S is designed for fleet management, anti-theft protection and advanced telemetry use cases where Green-Gps's mapping, alerts and reporting can be applied immediately.
Key Highlights
- Green-Gps compatible GPS tracker for reliable, real-time tracking across fleets and assets.
- 4G cellular modem with optional 2G/3G modules (region/project dependent) and built-in WiFi hotspot for passenger connectivity and multimedia upload.
- Rich expansion ports — two RS232, one RS485, CANBus (default J1939) and multiple I/O to integrate fuel sensors, cameras and telematics peripherals.
- CANBus telemetry out of the box (J1939) to capture vehicle speed, remaining fuel level and other engine data; custom CAN protocols available.
- Remote control capabilities including cut fuel/power and speed limiting through relay support for immobilizer-style interventions.
- Comprehensive alarm set: geofence, overspeed, ACC/ignition detection, power-cut/low-voltage, antenna fault and SOS input.
- Multimedia-ready: image snapshot and short video upload when paired with a dash camera to enrich Green-Gps incident reporting.
How It Works with Green-Gps
HB-A9S integrates with Green-Gps to stream GPS coordinates, CANBus telemetry and alarm events in real time. Data flows from the tracker to Green-Gps over the cellular network, where fleet managers can view live position, playback trips, configure alerts and generate reports. Multimedia uploads (snapshots/videos) and peripheral sensor data are attached to events in Green-Gps for faster incident investigation and compliance evidence.
- Real-time location and telemetry updates delivered to Green-Gps for live monitoring and historical playback.
- ACC/ignition detection and driver status sent as discrete events for driver behavior and shift logging.
- Fuel monitoring via CANBus and analog AD inputs, with fuel level telemetry visible in Green-Gps dashboards.
- Remote immobilizer-style actions: cut fuel/power and speed limiting through relay control, executed and logged via Green-Gps controls.
- Optional Bluetooth sensors (BT/BLE) supported for temperature, asset proximity or driver ID integrations.
- Multimedia: camera-triggered snapshots and short video uploads associated with alarms and events in Green-Gps.
- SOS and alarm events trigger immediate alerts and location pushes to Green-Gps for rapid response.
Technical Overview
| Model | HB-A9S |
|---|---|
| Connectivity | 4G cellular modem (with region/project dependent 2G/3G/4G module options); WiFi 802.11 b/g/n hotspot |
| Positioning | GPS / BDS; sensitivity: Capture -148 dBm, Track -162 dBm; cold start ≈ 36 s |
| WiFi | 802.11 b/g/n, functions as WiFi hotspot for up to 10 clients and multimedia transmission |
| Bluetooth | Optional BT 4.2 (BT/BLE) for sensors, beacons and accessories |
| CANBus | Default J1939 protocol (other CAN protocols customizable); retrieves speed, remaining fuel and engine parameters |
| Power & Battery | Working voltage 9–36 V; working current ≈100 mA; internal backup battery 400 mAh (standby ~2 hours) |
| Interfaces | ACC detection ×1; SOS input ×1; digital inputs ×2; AD inputs ×2 (0–33 V); digital output ×1; RS232 ×2; RS485 ×1; CANBus ×1; 1-Wire ×1; USB 2.0 ×1; audio output (MIC/intercom) ×1; pulse speed input ×1; SIM card slot ×1 |
| Multimedia & Peripherals | Image snapshot and short video upload when paired with dash camera; supports external microphone, intercom, camera, card readers, fuel/weight sensors and relays |
| Environmental & Protection | Operating temperature -30°C to +70°C; storage -40°C to +85°C; protection: IP54 |
| Physical | Size 114 × 82 × 34 mm; weight 210 g |
Use Cases
- Bus fleets and passenger transport — provide passenger WiFi, record multimedia evidence and monitor driver behavior via Green-Gps.
- Car rental and shared mobility — use ignition/ACC detection, geofencing and remote cut-off for anti-theft and contract enforcement.
- Long-haul logistics and hazardous goods — capture CANBus telemetry, fuel monitoring and video snapshots to support compliance and incident analysis.
- Fleet telematics with sensors — integrate fuel sensors, weight displays or RFID/card readers for driver identification and asset-level telemetry.
- High-security vehicle deployments — SOS alarm, speed limiting and remote fuel/power cut offer anti-theft and emergency response capabilities.
Why Choose This Tracker with Green-Gps
Choosing the HB-A9S as a Green-Gps compatible GPS tracker gives fleet operators a single device that combines reliable real-time tracking, rich telemetry from CANBus and peripheral support for multimedia and sensor data. The built-in WiFi hotspot and multimedia upload capabilities enrich Green-Gps event records with images and short video, making incident review faster and more conclusive. Remote control functions such as fuel/power cut and speed limiting add an enforcement layer for anti-theft and safety policies, while ACC detection and extensive alarm types help enforce operational rules and improve driver management.
Technically flexible — with 2G/3G/4G variants where required, optional Bluetooth sensor support and multiple serial/analog inputs — HB-A9S scales across vehicle types and industries. Integrated with Green-Gps, it becomes part of an end-to-end fleet management solution that delivers real-time insights, better security, and simplified remote management for telecom-driven telemetry, fuel monitoring and multimedia-enhanced reporting.
Set Up HB-A9S
Use with a tracker
-
Set the Operator APN
CountryCarrierAPNinternet.comcel.com.coUserCOMCELWEBPasswordCOMCELWEB
- Check your tracker clock setup is set UTC-0 or GMT. (The most trackers come from the factory on UTC.)
- For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
-
Set Up the IP and port on your tracker: (automatic detect tracker's protocol.)
IP 54.85.159.138 Port 8888 - Add on your Account on devices with the IMEI or unique ID.