The MTA-Glonass (ver. 12M) is a compact, Green-Gps compatible GPS tracker built for dependable vehicle monitoring and telemetry. Designed for fleet management and anti-theft applications, this terminal combines a 50‑channel high‑sensitivity GPS receiver with a GSM 900/1800 communications module to deliver real‑time tracking, event logging and two‑way data exchange over DATA, GPRS and SMS channels.
Its wide input voltage range (9–68 V), built‑in rechargeable battery and extensive I/O make the MTA-Glonass (ver. 12M) ideal for installation in automotive and industrial vehicles where uninterrupted telemetry, fuel monitoring and remote immobilizer control are required. As a Green-Gps compatible device, it integrates with Green-Gps’s platform for live position updates, telemetry reports and configurable alerts.
Key Highlights
- Green-Gps compatible GPS tracker for reliable real‑time tracking and telemetry integration.
- 50‑channel high‑sensitivity GPS receiver for accurate coordinate fixes and consistent positioning.
- GSM 900/1800 connectivity with DATA, GPRS and SMS channels for two‑way communication and remote alerts.
- Wide DC input (9–68 V) and built‑in 600 mAh rechargeable battery providing ≥6 hours standby during power loss.
- Comprehensive I/O for fuel monitoring, ignition sensing, engine‑hours accounting and remote immobilizer control.
- Low power consumption and compact IP30 housing (≤90 × 65 × 30 mm, ≤200 g) suitable for discrete vehicle installation.
- Large non‑volatile event storage (16,000–125,000 records depending on configured memory) for offline logging and later upload to Green-Gps.
How It Works with Green-Gps
When integrated with Green-Gps, the MTA-Glonass (ver. 12M) becomes a fully managed asset for fleet management, anti‑theft protection and telemetry reporting. The device transmits GPS coordinates and event telemetry over GPRS/DATA or SMS to Green-Gps servers, where data is processed for live maps, geofencing, alerts and historical reports. Configuration and alert thresholds can be set in Green-Gps to leverage the terminal’s onboard inputs and outputs.
- Real‑time location and telemetry updates via GPRS/DATA (with SMS fallback) for continuous fleet visibility.
- Ignition input used for sleep control and precise engine‑hours accounting, reported to Green-Gps for maintenance scheduling.
- Fuel monitoring using ADC input (direct tank level) and frequency/pulse inputs for flow meters or sending unit interfaces.
- Remote immobilizer or switching via the optional open‑collector output (up to 50 V, 1.5 A) to support anti‑theft actions from Green-Gps.
- 1‑Wire temperature sensor support (optional) for temperature telemetry integrated into Green-Gps alerts and logs.
Technical Overview
| Connectivity | GSM module with DATA, GPRS and SMS channels for two‑way communication |
|---|---|
| Bands | GSM 900 / 1800 |
| Power & Battery | Wide DC input 9–68 V; built‑in rechargeable battery ≈600 mAh. Standby operation ≥6 hours; operational readiness <1 minute. Power consumption at 12 V: active ≤110 mA, idle ≤35 mA, sleep ≤20 mA. |
| Interfaces | Multiple dry‑contact inputs (one negative‑trigger, one configurable negative/positive, ignition input, positive‑trigger for battery‑ground disconnect, two negative‑trigger for frequency/pulse fuel sensors), one analog ADC input (≤12 V), optional 1‑Wire input, optional open‑collector output (≤50 V, ≤1.5 A). |
| GNSS | 50‑channel high‑sensitivity GPS receiver (precise coordinate determination) |
| Bluetooth | Not specified in device documentation (Bluetooth sensors not included in confirmed specs) |
| Remote Management | Two‑way data exchange via DATA/GPRS/SMS for remote telemetry, configuration and event upload (no specific FOTA/web management listed) |
| Form Factor | Compact housing IP30; dimensions ≤90 × 65 × 30 mm; mass ≤200 g |
Use Cases
- Fleet management and route monitoring — integrate live GPS, ignition and engine‑hours into Green-Gps to optimize dispatch and maintenance.
- Fuel monitoring and fraud prevention — combine ADC tank level readings and frequency/pulse inputs to detect fuel loss and generate alerts in Green-Gps.
- Anti‑theft and remote immobilization — receive theft alarms and actuate the open‑collector output from Green-Gps to immobilize the vehicle.
- Event logging and compliance — store large volumes of event records on the device and upload to Green-Gps for audit trails and regulatory reporting.
- Temperature‑sensitive cargo monitoring — use the optional 1‑Wire temperature input for cold‑chain telemetry reported to Green-Gps (where fitted).
Why Choose This Tracker with Green-Gps
Pairing the MTA-Glonass (ver. 12M) with Green-Gps gives fleet operators a sturdy, low‑power GPS tracker with proven telemetry I/O and reliable GSM communications. Its wide voltage tolerance and backup battery preserve tracking during power interruptions, while rich input options let Green-Gps consume meaningful telematics: ignition status for engine‑hours, analog and pulse fuel data for fuel monitoring, and open‑collector control for immobilization. Large onboard storage ensures no data loss when connectivity is interrupted.
For operations that require compact hardware, dependable satellite positioning and straightforward GPRS/SMS integration, this Green-Gps compatible GPS tracker delivers practical fleet management benefits without unnecessary complexity. It is especially well suited for organizations that need robust event logging, fuel control, and remote vehicle control combined with the analytics and alerting capabilities available within the Green-Gps platform.
Set Up MTA-Glonass (ver. 12M)
Use with a tracker
-
Set the Operator APN
CountryCarrierAPNinternet.comcel.com.coUserCOMCELWEBPasswordCOMCELWEB
- Check your tracker clock setup is set UTC-0 or GMT. (The most trackers come from the factory on UTC.)
- For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
-
Set Up the IP and port on your tracker: (automatic detect tracker's protocol.)
IP 54.85.159.138 Port 8888 - Add on your Account on devices with the IMEI or unique ID.