TS-V1 Professional Vehicle GPS Tracker
The TS-V1 is a compact, hardwired GPS tracker built for professional fleet management, theft prevention and vehicle telemetry. Designed for installation in commercial vehicles, construction machines, rental cars and private vehicles, the TS-V1 delivers reliable real-time tracking, geo-fencing, mileage statistics and remote control features such as fuel/power cut-off and SOS alarms. Its rugged design, broad operating voltage range and removable backup battery make it suitable for continuous fleet operation.
Green-Gps compatible out of the box, the TS-V1 integrates with third-party online positioning platforms via configurable IP/port settings and supports both SMS and platform-based command/control. That makes it straightforward to add this GPS tracker to your Green-Gps setup for centralized real-time tracking, fleet management, anti-theft response and telemetry reporting.
Key Highlights
- Green-Gps compatible: configurable IP/port and platform-friendly protocols for smooth integration with Green-Gps dashboards and alerts.
- Real-time tracking: high-sensitivity SiRF III or U‑blox GNSS chip provides approximately 5 m position accuracy for reliable location updates.
- Wide cellular support: 2G/3G/4G support (bands depend on destination country) for global connectivity choices.
- Fleet management ready: mileage statistics, ACC/ignition monitoring and over-speed alerts to support operational visibility and reporting.
- Anti-theft & remote control: SOS alarm, compatibility with original vehicle anti-theft systems, and remote fuel/power cut-off outputs.
- Robust power design: DC 9–36V input with removable 3.7V/600 mAh backup battery for continued operation during power loss.
- Flexible I/O and sensors: multiple digital inputs, one analog fuel input and optional temperature/fuel sensors for expanded telemetry.
How It Works with Green-Gps
Integrating the TS-V1 with Green-Gps enables a unified view of vehicle location and status. Install the hardwired unit in the vehicle, connect the supplied GPS and GSM antennas, configure the device to point to your Green-Gps server (modify IP and port if required), and the unit will upload position and event data in real time. Green-Gps then handles visualization, geo-fence management, alerts and historical reporting.
- Real-time location and telemetry updates sent to Green-Gps for live map tracking and history playback.
- ACC/ignition status monitoring for engine-on/engine-off events and accurate mileage calculation.
- Fuel monitoring via the analog input for fuel sensors (e.g., TS-C11) to support fuel monitoring and consumption reports.
- Remote cut-off outputs for fuel or power circuits—use Green-Gps or SMS commands to immobilize a vehicle when required.
- SOS, movement, over-speed and geo-fence breach notifications forwarded to Green-Gps for instant operator alerts.
- Remote voice monitoring and compatibility with vehicle anti-theft alarms to enhance recovery and incident verification workflows.
Technical Overview
| Connectivity | 2G / 3G / 4G (model/bands depend on destination country) |
|---|---|
| Bands | Country-dependent cellular bands (configurable by model) |
| Power & Battery | Operating voltage DC 9V–36V; internal removable rechargeable 3.7V / 600 mAh Li‑ion backup battery (used as backup) |
| Interfaces | 3 digital inputs (including ACC), 1 temperature sensor input (TS-C5), 1 SOS/open-door input; 2 digital outputs (remote fuel/power cut-off); 1 analog input for fuel sensors (e.g., TS-C11) |
| GNSS | SiRF III or U‑blox GPS chip; sensitivity -159 dBm; accuracy approx. 5 m; TTFF: Hot 1s, Warm 35s, Cold 45s, Reacquisition 0.1s |
| Bluetooth | Not listed in device specifications |
| Remote Management | Configurable IP and port; supports SMS and online platform command/control for remote configuration and actions |
| Form Factor & Environmental | Dimensions 95 × 75 × 25 mm; Weight 0.459 kg; Operating temp -20°C to +70°C; Storage -40°C to +85°C; Humidity 5%–95% non‑condensing |
Use Cases
- Fleet management: real-time tracking, mileage reporting and over-speed alerts to optimize routes and driver behavior.
- Anti-theft and recovery: SOS alarm, compatibility with vehicle anti-theft systems and remote fuel/power cut-off for fast response.
- Remote diagnostics & telemetry: ACC status, analog fuel input and optional temperature sensor feed into Green-Gps for ongoing vehicle health and fuel monitoring.
- Construction and specialty vehicles: rugged operating range and wide voltage support make the TS-V1 suitable for heavy equipment and special-purpose fleets.
- Rental and shared vehicles: geo-fencing, movement alerts and remote immobilization help enforce usage policies and reduce misuse.
Why Choose This Tracker with Green-Gps
Pairing the TS-V1 with Green-Gps gives fleet operators a dependable, easy-to-integrate solution for real-time tracking, telemetry and anti-theft control. The TS-V1’s professional I/O set (ACC, analog fuel input, SOS, digital outputs) and configurable connectivity settings enable fast onboarding into Green-Gps-managed fleets without complex firmware changes. You get precise GNSS positioning, event-driven alerts and remote actuation (fuel/power cut) that Green-Gps can turn into automated workflows, reports and operator alerts. This combination supports scalable fleet management, strengthens anti-theft defenses and centralizes vehicle telemetry for better operational decisions.
Set Up TS-V1
To set the tracker send the following commands by SMS messages, the sample setup the device password is BbNpTr, this password is the default
- Factory reset
FORMAT - Set the operator APN
apnBbNpTr {{apn}} - Set the APN username
apnuserBbNpTr {{apnu}} - Set the APN password
apnpasswdBbNpTr {{apnp}} - Set the GPRS server
ip54.85.159.138 8888
To check settings CXZT