The VT110 is a compact, Green-Gps compatible GPS tracker designed for reliable real-time tracking and vehicle telemetry. Built for fleet management and anti-theft protection, the VT110 combines multi-constellation GNSS (BDS/GPS/GLONASS/QZSS) with GSM base station positioning over 2G networks to deliver consistent location reports, configurable alarms, and remote control capabilities suitable for commercial and private vehicle deployments.
Green-Gps users benefit from a small, rugged unit that reports location, mileage, heading changes, ACC (ignition) events and a wide range of safety alarms. With IP66 protection, internal backup power and FOTA support, the VT110 provides the core telematics features fleet operators need for real-time tracking, fuel monitoring integration (via optional sensors), and remote immobilization where required.
Key Highlights
- Green-Gps compatible GPS tracker built for real-time tracking and fleet management with multi-constellation GNSS for higher positioning reliability.
- Comprehensive alarm suite—geo-fence, speeding, GPS signal loss, external power loss, low battery, SMS alarm, engine and door status changes, idling, fatigue driving, and impact/towing detection.
- Remote control features including fuel/electricity cut-off for immobilizer-like capability and optional buzzer alarm for anti-theft response.
- Compact, rugged form factor (90 x 33.8 x 16.6 mm, ~54 g) with IP66 waterproof rating and built-in antennas for easy, discreet installation.
- Supports time-interval, distance-based, heading-change and mileage reporting to suit telemetry and operational reporting needs.
- Internal 120 mAh backup battery providing roughly 30 minutes of operation during power loss for continued tracking and alarm reporting.
- Expandable through accessories—fuel sensors, RFID/iButton readers, relays and WiFi modem—to add fuel monitoring, driver identification, and remote control capabilities.
How It Works with Green-Gps
When integrated into the Green-Gps platform, VT110 delivers continuous position and status data to enable live mapping, alerts and historical reports. Green-Gps ingests GNSS and GSM-based position fixes, telemetry such as mileage and heading, and event-driven alarms to power fleet dashboards, compliance reports and anti-theft workflows. The device’s configurable reporting modes let you balance update frequency and network usage for efficient fleet management.
- Real-time location and telemetry updates (GNSS + GSM base station).
- Ignition/ACC status detection and engine/door status change alarms for accurate trip and driver behavior records.
- Fuel monitoring support via optional capacitive or ultrasonic fuel sensors (accessories) for consumption and refueling alerts.
- Remote immobilizer capability using the remote fuel/electricity cut-off and relay accessories to support anti-theft procedures.
- Rich alarm reporting—geo-fence, speeding, idling, fatigue driving and impact/towing—that maps directly into Green-Gps alerting and notification channels.
Technical Overview
| Connectivity | 2G GSM (VT110-2G) |
|---|---|
| Bands | 850 / 900 / 1800 / 1900 MHz |
| Power & Battery | External vehicle power; internal 120 mAh backup battery (~30 minutes operation on loss of external power) |
| Interfaces | Nano SIM, Micro USB port, 1 configurable digital input (e.g., ACC detection), 1 output (for relay/buzzer) |
| GNSS | BDS / GPS / GLONASS / QZSS (multi-constellation positioning) |
| Sensors & Memory | 3D acceleration sensor for impact/towing detection; 16 Mbit flash memory |
| Antennas | Built-in FPC GSM antenna and ceramic GNSS antenna |
| Remote Management | FOTA (firmware over-the-air) upgrades; dual server configuration for redundancy |
| Form Factor & Durability | Compact: 90 x 33.8 x 16.6 mm; weight ~54 g; IP66 waterproof rating |
Use Cases
- Fleet management: real-time tracking, mileage reporting, speeding and idling alerts to improve utilization and reduce operational costs.
- Public transport and school bus management: location updates, geo-fence alarms and driver/engine status monitoring to enhance safety and route oversight.
- Taxi and ride operations: trip logging, heading-change and time/distance reporting for fare and dispatch accuracy.
- Vehicle insurance and lease monitoring: tamper and displacement alerts, mileage records and optional fuel monitoring for policy enforcement and risk assessment.
- Private anti-theft protection: discreet installation, impact/towing detection and remote fuel/electricity cut-off to immobilize a stolen vehicle.
Why Choose This Tracker with Green-Gps
The VT110 pairs practical hardware with a Green-Gps-compatible integration path to deliver reliable, cost-effective telematics. Its multi-constellation GNSS and GSM base station positioning provide resilient location data for real-time tracking and telemetry. Built-in alarms and a 3D acceleration sensor improve theft detection and incident reporting; optional accessories such as capacitive/ultrasonic fuel sensors, RFID/iButton readers and remote relays enable advanced fuel monitoring, driver identification and immobilizer workflows when connected through Green-Gps.
Operational benefits include FOTA for remote updates, dual-server configuration for higher availability, and configurable reporting modes to align data flow with business needs. For fleet managers seeking anti-theft protection, fuel monitoring, ignition-aware reporting and straightforward Green-Gps integration, the VT110 is a compact, rugged solution that balances core GPS tracker features with accessory-driven expandability and dependable telematics performance.
Set Up VT110
To set the tracker send the following commands by SMS messages
- Reset factory settings
FACTORY# - Set the time zone UTC-0
GMT,E,0# - Set the operator APN
APN,{{apn}},{{apnu}},{{apnp}}# - Set the GPRS server
SERVER,1,d.plaspy.com,8888#
or
eqjsFZjixll16stOUlDpwHBz3nJG - Set the update interval every 60 seconds
TIMER,60#
To check parameter settings PARAM#