GF200LS — 3 Years Disposable Asset GPS Tracker
The GF200LS is a Green-Gps compatible, long-standby magnet-mounted asset GPS tracker built for low-maintenance, long-term deployments. Designed for heavy-duty vehicles, cargo containers, and loaned or leased units, the GF200LS balances exceptional battery life with flexible reporting modes to support both periodic and real-time tracking scenarios on Green-Gps's web and mobile platforms.
The device uses three CR123 batteries and an efficient low-power design to deliver up to three years of standby operation when configured for one position per day. With IP65 waterproofing, a strong removable magnetic mount, and an anti-tamper light sensor, the GF200LS is optimized for fleet management, anti-theft monitoring, stolen vehicle recovery assistance, and other long-term asset management needs where low-touch telemetry and reliable location reporting are essential.
Key Highlights
- Ultra-long battery life — up to three years at one location per day for low-maintenance asset GPS tracking.
- Green-Gps compatible for seamless real-time tracking and historical reporting on web and mobile platforms.
- Multiple working modes (real-time, interval, clock) let you balance reporting frequency and battery life.
- IP65 waterproof ABS housing with strong N54 magnet and removable cover for simple installation on metal assets.
- Fast and sensitive GNSS (SIMCom A767 + AT6558R) for quick TTFF and sub-5 m accuracy in typical conditions.
- Multi-network cellular support (LTE-FDD, LTE-TDD plus 2G GSM) for wide area connectivity and GPRS/TCP/IP reporting.
- Light-sensor tamper alert to detect unauthorized removal and help with anti-theft workflows.
How It Works with Green-Gps
As a Green-Gps compatible GPS tracker, the GF200LS sends position and event data to Green-Gps using its cellular link (GPRS/TCP over LTE/2G) or via the configured server IP/port. Green-Gps ingests the device's location reports and alerts, allowing fleet managers and asset owners to view live positions, review historical routes, and receive tamper or status notifications through Green-Gps's dashboards and mobile apps.
- Real-time tracking: When set to real-time mode, GF200LS can deliver continuous location updates (approx. 24 hours on battery in this mode) for short-term active monitoring.
- Periodic telemetry: Interval and clock modes (e.g., one position per day) enable long-term telemetry with multi-year battery life, ideal for container and loaned vehicle tracking.
- Tamper and removal alerts: Light-sensor anti-tamper reports are sent as events to trigger immediate Green-Gps notifications and escalation workflows.
- Configuration and control: The device supports APN and server IP/port configuration plus SMS commands for remote mode switching and status checks; Green-Gps can guide setup to ensure consistent reporting.
- Compatibility with complementary telemetry: Green-Gps can combine GF200LS location and event data with other Green-Gps-compatible inputs (fuel monitoring, ignition/immobilizer data, or external Bluetooth sensors) provided by additional hardware or integrations.
Technical Overview
| Connectivity | LTE-FDD, LTE-TDD and 2G GSM with GPRS Class 12 TCP/IP |
|---|---|
| Bands | LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B28/B66; LTE-TDD: B34/B38/B39/B40/B41; 2G GSM: 850/900/1800/1900 MHz |
| Power & Battery | 3 × CR123 batteries (4500 mAh total, ~3V equivalent). Typical standby: 1 location/day ≈ up to 3 years; real-time mode ≈ 24 hours. Working current 40–80 mA/h (3V input); standby current 60–100 μA/h. |
| Interfaces | Removable magnetic back cover; light-sensor tamper (anti-tamper) alarm; SMS configuration commands (default password 123456) for mode/APN/server settings and status checks. |
| GNSS | SIMCom A767 + AT6558R GPS; GPS L1 1575.42 MHz, 66 channels; hot start ≤3s, cold start ≤45s; tracking sensitivity -165 dBm; acquisition -148 dBm; typical accuracy <5 m. |
| Antenna | Built-in LTE antenna and GPS ceramic antenna |
| Memory | 32 + 32 Mb |
| Operating Range | Operating temperature: -20 °C to +60 °C |
| Enclosure & Form Factor | ABS fireproof housing, IP65 waterproof rating, size 64 × 55 × 30 mm, weight 0.15 kg, N54 level strong magnet for external mounting |
| Bluetooth | Not listed / no BLE reported |
| Remote Management | SMS configuration commands for mode switching, timezone, APN, admin IP/port, restart, status check and factory reset; server IP/port configurable for TCP/IP reporting. |
Use Cases
- Financial loan asset monitoring — ensure collateral location with low-maintenance, long-life GPS reporting.
- Container and cargo tracking — periodic location updates and tamper alerts for long transit and storage cycles.
- Stolen vehicle recovery assistance — provide discreet location telemetry and removal alerts to support recovery teams.
- Loaned or leased vehicle management — track dispersed, intermittently used assets without frequent maintenance.
- Long-term asset inventory and fleet management — maintain location visibility for rarely moved or seasonal equipment.
Why Choose This Tracker with Green-Gps
Pairing the GF200LS with Green-Gps delivers a practical, cost-effective solution for organizations that need reliable position data without frequent onsite maintenance. The GF200LS stands out for its three-year standby capability in low-reporting modes, rugged IP65 build, and simple magnetic install — making it well suited to fleet management and anti-theft deployments where low-touch telemetry is essential.
On Green-Gps, GF200LS data becomes actionable: real-time tracking when needed, scheduled interval reports for long-term monitoring, and immediate tamper notifications to trigger alerts or recovery workflows. While the GF200LS focuses on location and event telemetry, Green-Gps can enrich those records by combining them with other telemetry sources (fuel monitoring, ignition or immobilizer status, or Bluetooth sensors) through additional Green-Gps-compatible devices or integrations. Together, they provide scalable, trustworthy tracking and reporting that reduces operational overhead and improves asset security.
Set Up GF200LS
Use with a tracker
-
Set the Operator APN
CountryCarrierAPNinternet.comcel.com.coUserCOMCELWEBPasswordCOMCELWEB
- Check your tracker clock setup is set UTC-0 or GMT. (The most trackers come from the factory on UTC.)
- For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
-
Set Up the IP and port on your tracker: (automatic detect tracker's protocol.)
IP 54.85.159.138 Port 8888 - Add on your Account on devices with the IMEI or unique ID.