The OBD GPS Tracker G08 is a compact, plug-and-play OBD-II tracking unit optimized for Green-Gps compatible deployments. Designed for rental cars, taxis, fleet vehicles and light trucks, the G08 delivers reliable GPS + BeiDou positioning with LBS fallback and a set of vehicle alarms that make it ideal for real-time tracking, anti-theft monitoring and straightforward fleet management rollouts.
Because the G08 draws power directly from the vehicle OBD port (DC 9V–35V) and includes a 180 mAh backup battery, it provides continuous telemetry and alerting even during short power interruptions. Green-Gps-ready integration means you can quickly add the G08 into your Green-Gps fleet for live location, overspeed alerts, movement/vibration alarms and power-off notifications without complex wiring or long installation windows.
Key Highlights
- Green-Gps compatible OBD-II plug-in installation for fast, non-invasive deployment across fleets.
- Accurate positioning using GPS + BeiDou (BD) with LBS fallback — typical accuracy around 5 meters.
- Continuous power via OBD port (DC 9V–35V) plus 3.7V/180 mAh backup battery for temporary offline operation.
- Multiple vehicle alarms: overspeed, movement, vibration and power-off notifications for anti-theft protection.
- Compact, unobtrusive ABS housing (51 × 47 × 23 mm, 42 g) suited for passenger cars, taxis and trucks.
- Low standby and working current for minimal impact on vehicle electrical systems.
- Internal antennas simplify installation and reduce visual footprint inside the cabin.
How It Works with Green-Gps
The G08 sends location fixes, status messages and alarm events over cellular connection to Green-Gps, where they appear in real-time on the platform. Green-Gps ingests the G08 telemetry for live tracking, historical replay, geofencing, and configurable alerts. Integration is plug-and-play: insert the G08 into the vehicle OBD port, confirm the device on Green-Gps, and start receiving position and alarm data immediately.
- Real-time location and telemetry updates: GPS + BD positions and LBS fallback streamed to Green-Gps for live tracking.
- Overspeed, movement and vibration alarms appear as instant events inside Green-Gps dashboards and alert rules.
- Power-off and DC input detection sent to Green-Gps for anti-theft and maintenance workflows.
- Optional internal microphone input available for audio event capture where regulations and consent allow.
- Green-Gps supports telemetry aggregation and can complement G08 data with ignition, fuel monitoring or immobilizer inputs when combined with other compatible modules — enabling richer fleet analytics.
Technical Overview
| Model | OBD GPS Tracker G08 |
|---|---|
| Connectivity | Cellular module MT6261D (quad-band 2G). Micro SIM required. |
| Bands | 2G: 850 / 900 / 1800 / 1900 MHz |
| Power & Battery | Vehicle power DC 9V–35V via OBD port; 3.7V polymer backup battery, 180 mAh. Typical working current: 12V/30–60 mA; standby: 12V/5–15 mA. |
| Interfaces | OBD-II plug-in, optional internal microphone input, 1 × UART-TTL (3.3V) for integration/debugging; DC input detection. |
| GNSS | GPS + BeiDou (BD) with LBS fallback. Positioning accuracy ~5 m. Cold start ≈ 32 s, hot start ≈ 1 s, tracking sensitivity down to -162 dBm. |
| Antennas | Internal cellular and GPS antennas |
| Bluetooth | Not supported (no BLE reported) |
| Operating Environment | Operating: -20 °C to 70 °C. Storage: -30 °C to 80 °C. Humidity tolerance: 5%–95%. |
| Form Factor | ABS plastic housing, 51 mm × 47 mm × 23 mm, 42 g (plug-in OBD-II unit) |
Use Cases
- Fleet management: Deploy G08 devices for real-time vehicle location, overspeed alerts and movement monitoring across rental fleets or service vehicles.
- Rental car security: Fast plug-and-play installation and power-off alerts enable quick detection of tampering or unauthorized use.
- Taxi and rideshare monitoring: Compact OBD form factor and continuous tracking help monitor routes, driver behavior and incident events.
- Light truck asset protection: Vibration and movement alarms combined with power loss detection provide anti-theft visibility for last-mile and delivery vehicles.
- Operational telemetry: Use G08 position and status data in Green-Gps to optimize routing, reduce idle time and support maintenance workflows.
Why Choose This Tracker with Green-Gps
The G08 is a straightforward, cost-effective option for organizations that prioritize ease of installation, reliable positioning and tight Green-Gps integration. Its OBD-II plug-in design eliminates hardwiring, speeds up rollouts and reduces installation cost per vehicle. With GPS+BD positioning, a robust set of alarm types (overspeed, movement, vibration, power-off) and a backup battery for short power interruptions, the G08 keeps your fleet visible and secure. When connected to Green-Gps, the device’s telemetry feeds into centralized fleet dashboards and alerting rules so operations teams can act on real-time insights.
Choose the G08 with Green-Gps if you need a Green-Gps compatible GPS tracker that supports rapid deployment, dependable real-time tracking and essential anti-theft functionality without extra hardware complexity. For fleets that require extended telemetry — such as fuel monitoring, ignition event logging or immobilizer control — Green-Gps can combine G08 position and alarm data with additional Green-Gps-compatible modules to deliver a complete telematics solution.
Set Up G08
Use with a tracker
-
Set the Operator APN
CountryCarrierAPNinternet.comcel.com.coUserCOMCELWEBPasswordCOMCELWEB
- Check your tracker clock setup is set UTC-0 or GMT. (The most trackers come from the factory on UTC.)
- For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
-
Set Up the IP and port on your tracker: (automatic detect tracker's protocol.)
IP 54.85.159.138 Port 8888 - Add on your Account on devices with the IMEI or unique ID.