The G183 series JOBD GPS Tracker is a compact, Green-Gps compatible OBD-level tracker engineered for vehicle diagnostics and real-time telematics. Designed for passenger cars and commercial vehicles, the G183 delivers precise GNSS positioning, comprehensive diagnostic protocol support and continuous TCP/SMS reporting so fleet operators and service providers can integrate location, DTCs and vehicle status into Green-Gps with minimal engineering effort.
The G183 combines robust in-vehicle connectivity with rich telemetry: mileage, fuel consumption, trip time, diagnostic trouble codes and extensive alarm reporting (speeding, harsh driving, collision, towing, low voltage, ignition on/off, dongle plug/unplug, SOS and high temperature). Its small form factor and OBD A/B interface make it ideal for scalable fleet management, anti-theft monitoring and vehicle health tracking when used with Green-Gps.
Key Highlights
- Green-Gps compatible OBD-level GPS tracker built for fleet management and vehicle diagnostics.
- Multi-constellation GNSS (GPS/GLONASS/QZSS/COMPASS/Galileo) with a 56-channel receiver and ~2.5 m CEP GPS accuracy.
- Supports OBDII, JOBD, J1939, J1708 and manufacturer-specific protocols (Toyota, Nissan, Mazda, Honda, Mitsubishi, Subaru, Suzuki, Daihatsu, Hino, Isuzu) for broad vehicle coverage.
- Real-time tracking and telemetry over TCP and SMS: mileage, fuel monitoring, trip time and DTC upload to Green-Gps.
- Comprehensive alarm set including speeding, harsh acceleration/deceleration, sudden turns, collision detection, towing and SOS alerts.
- Compact, durable design (62 x 50 x 25 mm, ~100 g) with low sleep current for reliable fleet deployment.
- Built-in accelerometer (±16 g, 3-axis) and 8 MB flash buffering for event reconstruction and offline data storage.
How It Works with Green-Gps
The G183 uploads location, diagnostic and event data over TCP or SMS so Green-Gps can ingest real-time tracking and telemetry feeds. Once integrated, Green-Gps dashboards and APIs can display live vehicle position, alarm events and maintenance-relevant DTCs for proactive fleet oversight.
- Real-time location and telemetry updates delivered via TCP/SMS for Green-Gps ingestion and visualization.
- Diagnostic Trouble Code (DTC) upload and protocol-aware vehicle parameters using OBDII/JOBD/J1939/J1708 and dedicated manufacturer protocols.
- Fuel monitoring and real-time mileage reporting for fuel consumption analysis within Green-Gps reports.
- Ignition on/off detection and a wide range of alarm reports (SOS, collision, tow, plug/unplug) to trigger Green-Gps alerts and workflows.
- Event reconstruction using the ±16 g accelerometer and local flash buffering to ensure accurate telematics history during temporary connectivity loss.
Technical Overview
| Model | G183 series JOBD GPS Tracker |
|---|---|
| Connectivity | TCP/SMS over cellular (multiple cellular module options) |
| Cellular Modules / Network Options | SIM800C (GSM/GPRS quad-band), LISA-U200 (HSPA + GPRS/EDGE), SIM5360E, SIM5320A/J variants (regional approvals) |
| Bands | Quad-band GSM for SIM800C; additional bands depend on chosen HSPA/3G module variant |
| Power & Battery | Operating 8–32 V DC; built-in rechargeable 3.7 V / 100 mAh backup battery; sleep current <10 mA at 12/24 V |
| Interfaces | Vehicle OBD interface (A/B type), micro-USB configuration port, MMCX SOS button interface |
| GNSS | GPS, GLONASS, QZSS, COMPASS, Galileo; 56-channel receiver; GPS accuracy ~2.5 m CEP; cold start ~30 s; hot start ~1 s; A‑GPS optional |
| Accelerometer & Sensors | ±16 g 3-axis accelerometer for collision and driving-event detection |
| Storage | 8 MB flash for buffering and offline event storage |
| Antennas | Built-in 2G/3G and GNSS antennas |
| Remote Management | Remote debugging, SMS-based position inquiry; TCP configuration and data upload |
| Dimensions & Weight | 62 x 50 x 25 mm; ~100 g |
| Accessories (optional) | USB private wire, SOS extension cable |
Use Cases
- Fleet management: combine real-time tracking, mileage and fuel monitoring to optimize routes and reduce operating cost with Green-Gps analytics.
- Vehicle diagnostics and preventive maintenance: upload DTCs and telematics to Green-Gps to prioritize repairs and reduce downtime.
- Anti-theft and safety monitoring: SOS alerts, dongle plug/unplug and towing alarms integrated into Green-Gps for rapid response.
- Driver behavior and risk management: harsh acceleration/braking, sudden turns and collision detection feed into driver scorecards and coaching programs.
- Commercial vehicle telemetry: support for J1939/J1708 and multiple manufacturer protocols for heavy-duty trucks and mixed fleets.
Why Choose This Tracker with Green-Gps
Choosing the G183 for Green-Gps integration delivers a practical balance of diagnostics depth and real-time tracking capability. Its broad protocol support ensures compatibility across passenger and commercial vehicle makes, while GNSS multi-constellation positioning and 56-channel reception provide reliable real-time tracking and accurate telemetry. Built-in accelerometer data and event buffering improve incident reconstruction and reduce data loss during temporary network outages.
For fleet operators and integrators, the G183 reduces deployment friction: OBD A/B connectivity, compact form factor, and multiple cellular module options accommodate regional network requirements. Green-Gps-compatible TCP/SMS reporting and remote debugging capabilities accelerate system integration, enabling telemetry, fuel monitoring and ignition-aware workflows to be operational quickly. Where immobilizer or Bluetooth sensors are part of a larger solution, the G183 can contribute ignition and diagnostic data to Green-Gps while external modules or gateways manage those peripheral functions.
Set Up G183
Use with a tracker
-
Set the Operator APN
CountryCarrierAPNinternet.comcel.com.coUserCOMCELWEBPasswordCOMCELWEB
- Check your tracker clock setup is set UTC-0 or GMT. (The most trackers come from the factory on UTC.)
- For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
-
Set Up the IP and port on your tracker: (automatic detect tracker's protocol.)
IP 54.85.159.138 Port 8888 - Add on your Account on devices with the IMEI or unique ID.